Partitioning and formatting from the command utility. The rescue drive containįile manager and command line utility. System on it, you'll need to repartition and format it. Especially if you've had Linux or some other operating You need to make sure that your hard drive is partitioned andįormatted properly.
Have you correctly prepared the USB drive in step one?ĭoes your USB drive properly support being booted from? (Try Is your BIOS properly configured for booting from the USBĭevice? (Is the USB device listed and does it have top priority?) If it isn’t working, then double-check the following before Please notice that you can seriously screw up your system by providing incorrectĪssuming that you properly configured your BIOS and your USBĭrive supports booting, your computer should now boot from the the rescue Hardware), promote your USB drive to the primary boot device.Įxit from the BIOS configuration, saving all changes. If it isn’t, your system might not support booting from USB.Īssuming that it is supported (as is the case with virtually all modern With your USB drive plugged in, the USB drive should be Go to the section that contains your boot devices. Hotkey instructions are generally provided on the screen. While booting (before Windows starts loading), get into theīIOS configuration screen by hitting something like F1, F2, Delete orĮscape. Instructions for doing so vary wildly from system to system, but You should now reboot and go into the BIOS configuration toīoot from USB. If no errors occurred in the above process, you should now beĪll set to setup Windows XP from USB drive! Please note that you'll only need the i386 folder.
When it's done, copy the Windows XP setup files to the USBĭrive. The program will alert you before writing the Please notice that all existing data on the USB drive will beĭestroyed during this step. It willĬheck necessary component and automatically download missing component from The utility will start creating rescue USB drive. Select USB drive for output device, and select the correctĭrive from the list. It is suggested to select 32-bit architecture and Windows PE The utility will allow you choose Windows PE architectureĪnd version. Insert the USB drive you intend to boot from. On Windows Vista or above operating system, you may need confirm the UAC How to setup Windows XP from USB drive?įirst, we need create a rescue USB drive which can boot the
0 kommentar(er)
